Stud layout
Stud centres sit on multiples of the spacing from the start of the wall so sheet edges land on a stud. Mark the near side from the running list.
Stud centers
Studs
Sheet width
Sheeting starts
Layout
- Studs8 on layout, 2 at the ends
- 10
- Sheetslast one 4' 0" wide
- 3
- Sheet joints backed
- 2 of 2
Wall
Wall framing
Printing uses the real sizes. Set the printer scale to 100% and check one dimension with a tape before cutting.
Studs on layoutEnd studsFlat studsSheet joints in violet have a stud behind them; amber ones do not.
| # | Mark | Position |
|---|---|---|
| 1 | End stud | 0" |
| 2 | Stud | 1' 3 1/4" |
| 3 | Stud | 2' 7 1/4" |
| 4 | Stud | 3' 11 1/4" |
| 5 | Stud | 5' 3 1/4" |
| 6 | Stud | 6' 7 1/4" |
| 7 | Stud | 7' 11 1/4" |
| 8 | Stud | 9' 3 1/4" |
| 9 | Stud | 10' 7 1/4" |
| 10 | End stud | 11' 10 1/2" |
Lumber quantities
For all the walls together. Studs on layout are one per spacing plus one, then extras for each corner, wall end and opening. Plates and noggings run the total length.
Free ends and T junctions
King and jack studs
Order
- Studs31 on layout + 16 for corners, ends and openings
- 47
- Plate stock120.0 linear ft
- 8 × 16' 0"
- Nogging stock40.0 linear ft
- 3 × 16' 0"
- Total linear feet
- 522.8
- Board feet
- 228.7
- Costat $800 per 1000 bft
- $182.97
Lumber: nominal to actual
Enter actual finished sizes in every tool. A nominal 2x4 is cut and dressed to the size shown.
| Nominal | Actual |
|---|---|
| 1x2 | 3/4" x 1 1/2" |
| 1x3 | 3/4" x 2 1/2" |
| 1x4 | 3/4" x 3 1/2" |
| 1x6 | 3/4" x 5 1/2" |
| 1x8 | 3/4" x 7 1/4" |
| 1x10 | 3/4" x 9 1/4" |
| 1x12 | 3/4" x 11 1/4" |
| 2x2 | 1 1/2" x 1 1/2" |
| 2x3 | 1 1/2" x 2 1/2" |
| 2x4 | 1 1/2" x 3 1/2" |
| 2x6 | 1 1/2" x 5 1/2" |
| 2x8 | 1 1/2" x 7 1/4" |
| 2x10 | 1 1/2" x 9 1/4" |
| 2x12 | 1 1/2" x 11 1/4" |
| 4x4 | 3 1/2" x 3 1/2" |
| 4x6 | 3 1/2" x 5 1/2" |
| 6x6 | 5 1/2" x 5 1/2" |
The link carries every input, so it opens the same calculation on a phone.