Units
Precision
Rebar
Bars start at the cover and run to the cover on the far side. Slab concrete and mesh are in the concrete calculator.
Edge to the bar
Bars along the length
Bars across the width
Lap
d
%
Price per
$
Bars and weight
- Bars along19' 9" clear
- 13
- Bars across11' 9" clear
- 21
- Lap40 bar diameters
- 1' 8"
- Total lengthwith 5% waste, laps included
- 528.7 ft
- Stock bars20' 0" each
- 27
- Weight160.2 kg at 0.668 lb/ft
- 353.2 lb
- Costat $9 per stock bar
- $243.00
- Chairsabout one per 3 sq ft
- 80
Plan
Slab rebar grid
Printing uses the real sizes. Set the printer scale to 100% and check one dimension with a tape before cutting.
Section
Section
Printing uses the real sizes. Set the printer scale to 100% and check one dimension with a tape before cutting.
Lap splice
Where a run is longer than a stock bar, overlap the bars by the lap and tie them; stagger the splices on neighbouring bars.
Lap splice
Printing uses the real sizes. Set the printer scale to 100% and check one dimension with a tape before cutting.
Bars along, from the long edge
| # | Position |
|---|---|
| 1 | 1 3/4" |
| 2 | 1' 1 3/4" |
| 3 | 2' 1 3/4" |
| 4 | 3' 1 3/4" |
| 5 | 4' 1 3/4" |
| 6 | 5' 1 3/4" |
| 7 | 6' 1 3/4" |
| 8 | 7' 1 3/4" |
| 9 | 8' 1 3/4" |
| 10 | 9' 1 3/4" |
| 11 | 10' 1 3/4" |
| 12 | 11' 1 3/4" |
| 13 | 11' 10 1/4" |
Bars across, from the end
| # | Position |
|---|---|
| 1 | 1 3/4" |
| 2 | 1' 1 3/4" |
| 3 | 2' 1 3/4" |
| 4 | 3' 1 3/4" |
| 5 | 4' 1 3/4" |
| 6 | 5' 1 3/4" |
| 7 | 6' 1 3/4" |
| 8 | 7' 1 3/4" |
| 9 | 8' 1 3/4" |
| 10 | 9' 1 3/4" |
| 11 | 10' 1 3/4" |
| 12 | 11' 1 3/4" |
| 13 | 12' 1 3/4" |
| 14 | 13' 1 3/4" |
| 15 | 14' 1 3/4" |
| 16 | 15' 1 3/4" |
| 17 | 16' 1 3/4" |
| 18 | 17' 1 3/4" |
| 19 | 18' 1 3/4" |
| 20 | 19' 1 3/4" |
| 21 | 19' 10 1/4" |
The link carries every input, so it opens the same calculation on a phone.