Shelves and drawers
Openings are counted from the top down the way a cabinet is read; positions are measured up from the inside bottom for marking.
Spacing
Mark shelves at
Openings
- Shelves5 openings sharing 5' 7"
- 4
- Each opening
- 1' 1 3/8"
- Closesopenings + shelves + clearances against the inside height
- yes
| Opening | Height | Bottom above floor | Shelf below at |
|---|---|---|---|
| 1 | 1' 1 3/8" | 4' 8 5/8" | 4' 7 7/8" |
| 2 | 1' 1 3/8" | 3' 6 7/16" | 3' 5 11/16" |
| 3 | 1' 1 3/8" | 2' 4 5/16" | 2' 3 9/16" |
| 4 | 1' 1 3/8" | 1' 2 1/8" | 1' 1 3/8" |
| 5 | 1' 1 3/8" | 0" |
Elevation
Shelf layout
Printing uses the real sizes. Set the printer scale to 100% and check one dimension with a tape before cutting.
| # | Mark | Position |
|---|---|---|
| 1 | shelf 4 | 1' 1 3/8" |
| 2 | shelf 3 | 2' 3 9/16" |
| 3 | shelf 2 | 3' 5 11/16" |
| 4 | shelf 1 | 4' 7 7/8" |
Story stick
Shelf undersides at true size from the inside bottom, split into segments that each fit a sheet. Print at 100%, tape the segments in order and stand the stick in the carcass.
Shelf story stick
Printing uses the real sizes. Set the printer scale to 100% and check one dimension with a tape before cutting.
The link carries every input, so it opens the same calculation on a phone.