Section
Quantity, centers and spacing
The fewest balusters that keep every gap under the code gap, spaced equally. Set the rail angle for a raked rail: balusters stay plumb and the gap is measured horizontally.
0° is level
End balusters
Results
- Balusters
- 13
- Centerscentre to centre
- 5 1/4"
- Gapclear between balusters
- 3 3/4"
- First space
- 3 3/4"
- Last space
- 3 3/4"
Layout
Baluster layout
Printing uses the real sizes. Set the printer scale to 100% and check one dimension with a tape before cutting.
| # | Mark | Position |
|---|---|---|
| 1 | Baluster 1 | 4 1/2" |
| 2 | Baluster 2 | 9 3/4" |
| 3 | Baluster 3 | 1' 3" |
| 4 | Baluster 4 | 1' 8 1/4" |
| 5 | Baluster 5 | 2' 1 1/2" |
| 6 | Baluster 6 | 2' 6 3/4" |
| 7 | Baluster 7 | 3' 0" |
| 8 | Baluster 8 | 3' 5 1/4" |
| 9 | Baluster 9 | 3' 10 1/2" |
| 10 | Baluster 10 | 4' 3 3/4" |
| 11 | Baluster 11 | 4' 9" |
| 12 | Baluster 12 | 5' 2 1/4" |
| 13 | Baluster 13 | 5' 7 1/2" |
Centers and gaps are shown rounded to the site precision, so the rounded spacing times the number of spaces may not add up to the total length. Mark out from the running measurements, which are each measured from the same start.
Lumber: nominal to actual
Enter actual finished sizes in every tool. A nominal 2x4 is cut and dressed to the size shown.
| Nominal | Actual |
|---|---|
| 1x2 | 3/4" x 1 1/2" |
| 1x3 | 3/4" x 2 1/2" |
| 1x4 | 3/4" x 3 1/2" |
| 1x6 | 3/4" x 5 1/2" |
| 1x8 | 3/4" x 7 1/4" |
| 1x10 | 3/4" x 9 1/4" |
| 1x12 | 3/4" x 11 1/4" |
| 2x2 | 1 1/2" x 1 1/2" |
| 2x3 | 1 1/2" x 2 1/2" |
| 2x4 | 1 1/2" x 3 1/2" |
| 2x6 | 1 1/2" x 5 1/2" |
| 2x8 | 1 1/2" x 7 1/4" |
| 2x10 | 1 1/2" x 9 1/4" |
| 2x12 | 1 1/2" x 11 1/4" |
| 4x4 | 3 1/2" x 3 1/2" |
| 4x6 | 3 1/2" x 5 1/2" |
| 6x6 | 5 1/2" x 5 1/2" |
The link carries every input, so it opens the same calculation on a phone.