Section
Tile fit, spacing and cuts
One row across the floor or wall: how many tiles, where the cuts fall and how wide they are, under the layout rule you choose.
Equal cuts at both walls, never narrower than half a tile when avoidable
Color
Fit
- Tiles across7 whole, 2 cut
- 9
- First tile
- 6 3/4"
- Last tile
- 6 3/4"
- Gap at start wall
- 1/4"
- Gap at end wall
- 1/4"
- Joint
- 1/4"
Verify on site: walls are rarely straight or square. Dry-lay the first row and check the last cut before spreading adhesive.
Row layout
Tile layout
Printing uses the real sizes. Set the printer scale to 100% and check one dimension with a tape before cutting.
Whole tilesCut tiles
| # | Mark | Position |
|---|---|---|
| 1 | Tile 1, cut 6 3/4" | 7" |
| 2 | Tile 2 | 1' 7 1/4" |
| 3 | Tile 3 | 2' 7 1/2" |
| 4 | Tile 4 | 3' 7 3/4" |
| 5 | Tile 5 | 4' 8" |
| 6 | Tile 6 | 5' 8 1/4" |
| 7 | Tile 7 | 6' 8 1/2" |
| 8 | Tile 8 | 7' 8 3/4" |
| 9 | Tile 9, cut 6 3/4" | 8' 3 3/4" |
Running points are to the far side of each tile, measured from the start wall. Use Highlight every to mark every Nth tile and Only highlighted to list just those.
Lumber: nominal to actual
Enter actual finished sizes in every tool. A nominal 2x4 is cut and dressed to the size shown.
| Nominal | Actual |
|---|---|
| 1x2 | 3/4" x 1 1/2" |
| 1x3 | 3/4" x 2 1/2" |
| 1x4 | 3/4" x 3 1/2" |
| 1x6 | 3/4" x 5 1/2" |
| 1x8 | 3/4" x 7 1/4" |
| 1x10 | 3/4" x 9 1/4" |
| 1x12 | 3/4" x 11 1/4" |
| 2x2 | 1 1/2" x 1 1/2" |
| 2x3 | 1 1/2" x 2 1/2" |
| 2x4 | 1 1/2" x 3 1/2" |
| 2x6 | 1 1/2" x 5 1/2" |
| 2x8 | 1 1/2" x 7 1/4" |
| 2x10 | 1 1/2" x 9 1/4" |
| 2x12 | 1 1/2" x 11 1/4" |
| 4x4 | 3 1/2" x 3 1/2" |
| 4x6 | 3 1/2" x 5 1/2" |
| 6x6 | 5 1/2" x 5 1/2" |
The link carries every input, so it opens the same calculation on a phone.