Pour
Irregular slab
Draw the outline: enter a side length, then click the direction it runs, going clockwise, until the shape comes back to the start.
With this box focused: Shift+arrows add a side, Shift+C closes, Shift+Z undoes. Increment mode adds the length to the last side when the direction repeats.
- 1. ↑ 20' 0"
- 2. → 16' 0"
- 3. ↓ 10' 0"
- 4. ← 6' 0"
- 5. ↓ 10' 0"
- 6. ← 10' 0"
Thickness and beams
Rebar and mesh
Concrete and steel
- Areaperimeter 72' 0"
- 260.00 sq ft
- Slab
- 86.67 ft³
- Edge beams72' 0" long, below the slab
- 48.00 ft³
- Total concrete134.7 ft³ · 3.81 m³
- 4.99 yd³
- Rebar158 ft of #4 incl. 10% laps and waste
- 8 × 20' 0"
- Rebar weight48 kg
- 106 lb
- Rebar cost
- $96.00
Order a little over: ground is never perfectly level and formwork moves. 5 to 10% extra is usual.
Plan
Slab plan
Printing uses the real sizes. Set the printer scale to 100% and check one dimension with a tape before cutting.
Section
Slab grey, edge beams violet, internal beam amber. Not to scale with the plan.
Lumber: nominal to actual
Enter actual finished sizes in every tool. A nominal 2x4 is cut and dressed to the size shown.
| Nominal | Actual |
|---|---|
| 1x2 | 3/4" x 1 1/2" |
| 1x3 | 3/4" x 2 1/2" |
| 1x4 | 3/4" x 3 1/2" |
| 1x6 | 3/4" x 5 1/2" |
| 1x8 | 3/4" x 7 1/4" |
| 1x10 | 3/4" x 9 1/4" |
| 1x12 | 3/4" x 11 1/4" |
| 2x2 | 1 1/2" x 1 1/2" |
| 2x3 | 1 1/2" x 2 1/2" |
| 2x4 | 1 1/2" x 3 1/2" |
| 2x6 | 1 1/2" x 5 1/2" |
| 2x8 | 1 1/2" x 7 1/4" |
| 2x10 | 1 1/2" x 9 1/4" |
| 2x12 | 1 1/2" x 11 1/4" |
| 4x4 | 3 1/2" x 3 1/2" |
| 4x6 | 3 1/2" x 5 1/2" |
| 6x6 | 5 1/2" x 5 1/2" |
The link carries every input, so it opens the same calculation on a phone.