Shape
Regular polygon
Set the number of sides and the radius of the circle the corners sit on. Mark the corners around the circumference from the running list.
Results
- Side length
- 2' 0"
- Interior anglecentral angle 60.00°
- 120.00°
- Apothemcentre to the middle of a side
- 1' 8 13/16"
- Perimeter
- 12' 0"
- Polygon area
- 10.39 sq ft
- One triangle section
- 1.73 sq ft
- Bounding rectangleone vertex pointing up
- 3' 5 9/16" × 4' 0"
- Circle circumference
- 12' 6 13/16"
- Circle area
- 12.57 sq ft
- Slice areacircle sector per side
- 2.09 sq ft
- Segment areabetween a side and the circle
- 0.36 sq ft
- Centers around circumferencearc from vertex to vertex
- 2' 1 1/8"
Polygon, one section and segment
6-sided polygon
Printing uses the real sizes. Set the printer scale to 100% and check one dimension with a tape before cutting.
PolygonOne triangle sectionSegment to the circle
| # | Mark | Position |
|---|---|---|
| 1 | Corner 1 | 0" |
| 2 | Corner 2 | 2' 1 1/8" |
| 3 | Corner 3 | 4' 2 1/4" |
| 4 | Corner 4 | 6' 3 3/8" |
| 5 | Corner 5 | 8' 4 1/2" |
| 6 | Corner 6 | 10' 5 11/16" |
Lumber: nominal to actual
Enter actual finished sizes in every tool. A nominal 2x4 is cut and dressed to the size shown.
| Nominal | Actual |
|---|---|
| 1x2 | 3/4" x 1 1/2" |
| 1x3 | 3/4" x 2 1/2" |
| 1x4 | 3/4" x 3 1/2" |
| 1x6 | 3/4" x 5 1/2" |
| 1x8 | 3/4" x 7 1/4" |
| 1x10 | 3/4" x 9 1/4" |
| 1x12 | 3/4" x 11 1/4" |
| 2x2 | 1 1/2" x 1 1/2" |
| 2x3 | 1 1/2" x 2 1/2" |
| 2x4 | 1 1/2" x 3 1/2" |
| 2x6 | 1 1/2" x 5 1/2" |
| 2x8 | 1 1/2" x 7 1/4" |
| 2x10 | 1 1/2" x 9 1/4" |
| 2x12 | 1 1/2" x 11 1/4" |
| 4x4 | 3 1/2" x 3 1/2" |
| 4x6 | 3 1/2" x 5 1/2" |
| 6x6 | 5 1/2" x 5 1/2" |
The link carries every input, so it opens the same calculation on a phone.