Brickwork
Solve for
Courses
- Coursesnearest to 8' 0"
- 37
- Gaugecourse height; 2 5/8" with the entered joint
- 2 5/8"
- Bed jointentered 3/8"; this joint hits the height exactly
- 3/8"
- Height reached
- 8' 0"
- Sill at 3' 0"up 5/16" to the nearest course line
- course 14, 3' 5/16"
- Head at 7' 0"down 1" to the nearest course line
- course 32, 6' 11"
Courses are counted with a bed joint under every brick, so the height is courses × (brick + joint). Mark the rod from the base with the running list below so rounding never drifts.
| # | Mark | Position |
|---|---|---|
| 1 | 2 5/8" | |
| 2 | 5 3/16" | |
| 3 | 7 13/16" | |
| 4 | 10 3/8" | |
| 5 | 1' 1" | |
| 6 | 1' 3 9/16" | |
| 7 | 1' 6 3/16" | |
| 8 | 1' 8 3/4" | |
| 9 | 1' 11 3/8" | |
| 10 | 2' 1 15/16" | |
| 11 | 2' 4 9/16" | |
| 12 | 2' 7 1/8" | |
| 13 | 2' 9 3/4" | |
| 14 | Sill | 3' 5/16" |
| 15 | 3' 2 15/16" | |
| 16 | 3' 5 1/2" | |
| 17 | 3' 8 1/8" | |
| 18 | 3' 10 11/16" | |
| 19 | 4' 1 5/16" | |
| 20 | 4' 3 7/8" | |
| 21 | 4' 6 1/2" | |
| 22 | 4' 9 1/16" | |
| 23 | 4' 11 11/16" | |
| 24 | 5' 2 1/4" | |
| 25 | 5' 4 7/8" | |
| 26 | 5' 7 7/16" | |
| 27 | 5' 10 1/16" | |
| 28 | 6' 5/8" | |
| 29 | 6' 3 1/4" | |
| 30 | 6' 5 13/16" | |
| 31 | 6' 8 7/16" | |
| 32 | Head | 6' 11" |
| 33 | 7' 1 5/8" | |
| 34 | 7' 4 3/16" | |
| 35 | 7' 6 13/16" | |
| 36 | 7' 9 3/8" | |
| 37 | 8' 0" |
Gauge rod
Course lines at true size for marking a storey rod, split into segments that each fit a sheet. Print at 100%, cut along the segment ends and tape them in order; every segment is labelled with its heights so it can be checked against a tape.
Gauge rod
Printing uses the real sizes. Set the printer scale to 100% and check one dimension with a tape before cutting.
The link carries every input, so it opens the same calculation on a phone.