~/tools/

Rise Run Pitch Angle Grade Calculator

Units
Precision

Known run and one more value

Enter the run, pick which of pitch, angle, rise or grade you know, and the rest is calculated.

Horizontal distance
Known value
Rise per 12 units of run
Angle precision
Rise on the

Results

Pitchrise per 12 of run
6:12
Angle
26.57°
Rise
6' 0"
Graderise over run
50%
Slope lengthalong the incline
13' 5"
Rafter multiplierslope length per unit of run
1.1180
Rise per foot
6"

Pitch, run and angle scale

Rise, run, pitch and angle

Printing uses the real sizes. Set the printer scale to 100% and check one dimension with a tape before cutting.

0°15°30°45°60°75°90°Run 12' 0"Rise 6' 0"Slope 13' 5"26.57°90°

The triangle is drawn at 1:27.7, so it is not a cutting template. Run 3658 mm real becomes 132 mm on paper.

Pitch to angle, grade and rafter multiplier

Click a row to use that pitch. Rafter multiplier is the slope length per unit of run: multiply the run by it for the rafter line length.

PitchAngleGradeMultiplier
4.76°8.33%1.0035
9.46°16.67%1.0138
14.04°25%1.0308
18.43°33.33%1.0541
22.62°41.67%1.0833
26.57°50%1.1180
30.26°58.33%1.1577
33.69°66.67%1.2019
36.87°75%1.2500
39.81°83.33%1.3017
42.51°91.67%1.3566
45.00°100%1.4142
47.29°108.33%1.4743
49.40°116.67%1.5366
51.34°125%1.6008
53.13°133.33%1.6667
54.78°141.67%1.7341
56.31°150%1.8028
57.72°158.33%1.8727
59.04°166.67%1.9437
60.26°175%2.0156
61.39°183.33%2.0883
62.45°191.67%2.1619
63.43°200%2.2361

Lumber: nominal to actual

Enter actual finished sizes in every tool. A nominal 2x4 is cut and dressed to the size shown.

NominalActual
1x23/4" x 1 1/2"
1x33/4" x 2 1/2"
1x43/4" x 3 1/2"
1x63/4" x 5 1/2"
1x83/4" x 7 1/4"
1x103/4" x 9 1/4"
1x123/4" x 11 1/4"
2x21 1/2" x 1 1/2"
2x31 1/2" x 2 1/2"
2x41 1/2" x 3 1/2"
2x61 1/2" x 5 1/2"
2x81 1/2" x 7 1/4"
2x101 1/2" x 9 1/4"
2x121 1/2" x 11 1/4"
4x43 1/2" x 3 1/2"
4x63 1/2" x 5 1/2"
6x65 1/2" x 5 1/2"
The link carries every input, so it opens the same calculation on a phone.